Miles
29-11-07, 19:54
Hallo Zusammen,
habe eine Frage kann mir jemand diese Fehlermeldung erklären?
Message . . . . : Interactive activity approaching installed capacity.
Cause . . . . . : The interactive capacity installed on this system is
capable of using 6.7 percent of the total system processing power for
interactive work (applications that use a 5250-like datastream to
communicate with the workstation). Interactive activity on this system has
exceeded the threshold value of 5.8 percent of the total system processing
power. If the interactive workload is allowed to increase, interactive
response times may become erratic and total system throughput may be
diminished due to the overhead incurred when the interactive threshold is
exceeded.
This message will be repeated every 60 minutes until the amount of
interactive activity on the system is reduced below the threshold value.
Recovery . . . : Examine the interactive work on the system and determine
if it can be reduced. If not, an upgrade of the interactive capacity may be
required to achieve optimal throughput as the interactive workload grows.
If the QPFRADJ system value is set to '2' or '3,' you may need to adjust
the tuning priority and the faults per second guidelines for the *BASE and
*INTERACT pools. Use the Work with Shared Storage Pools (WRKSHRPOOL)
command to display the shared pool information. From this display, press
F11 to show the tuning data. Type the desired values for Priority and
Faults/Second, and then press Enter.
Additional interactive analysis can be achieved using the Performance
Monitor capabilities of Management Central in the iSeries Navigator product.
Ich verstehe dies leider nicht wirklich. vielleicht hatte dies schon mal jemand von euch.
Danke euch.
Nachtrag: Die CPU Auslastung in Wrkactjob ist im druchschnitt bei 30%. Haben V5R3 auf der Maschine.
habe eine Frage kann mir jemand diese Fehlermeldung erklären?
Message . . . . : Interactive activity approaching installed capacity.
Cause . . . . . : The interactive capacity installed on this system is
capable of using 6.7 percent of the total system processing power for
interactive work (applications that use a 5250-like datastream to
communicate with the workstation). Interactive activity on this system has
exceeded the threshold value of 5.8 percent of the total system processing
power. If the interactive workload is allowed to increase, interactive
response times may become erratic and total system throughput may be
diminished due to the overhead incurred when the interactive threshold is
exceeded.
This message will be repeated every 60 minutes until the amount of
interactive activity on the system is reduced below the threshold value.
Recovery . . . : Examine the interactive work on the system and determine
if it can be reduced. If not, an upgrade of the interactive capacity may be
required to achieve optimal throughput as the interactive workload grows.
If the QPFRADJ system value is set to '2' or '3,' you may need to adjust
the tuning priority and the faults per second guidelines for the *BASE and
*INTERACT pools. Use the Work with Shared Storage Pools (WRKSHRPOOL)
command to display the shared pool information. From this display, press
F11 to show the tuning data. Type the desired values for Priority and
Faults/Second, and then press Enter.
Additional interactive analysis can be achieved using the Performance
Monitor capabilities of Management Central in the iSeries Navigator product.
Ich verstehe dies leider nicht wirklich. vielleicht hatte dies schon mal jemand von euch.
Danke euch.
Nachtrag: Die CPU Auslastung in Wrkactjob ist im druchschnitt bei 30%. Haben V5R3 auf der Maschine.