-
Fehler in Gesamtsicherung
Hallo zusammen,
habe seit der Umstellung vor 2 Tagen auf V5R4 ein Problem mit der zeitgesteuerten Gesamtsicherung. Vorher lief alles seit Jahren problemlos, aber jetzt bekomme ich die Fehlermeldung, dass nicht alle Subsysteme innerhalb von 30 Minuten beendet worden konnten.
Hat vielleicht jemand eine Idee, dir mir da weiterhelfen könnte??
Vielen Dank im Voraus !
Wolfgang
-
hi Gemeinde,
ich habe das selbe problem. wir wollten am Sonntag ne komplettsicherung machen go save 21 entire system.
auch bei uns trat diese problem auf unseren beiden iSeries 520 V5R4M0 auf.
wir haben das problem noch nicht an IBM weitergegeben, da wir glaubten zu dä... lich zu sein und irgendwas übersehen hätten.
scheint aber also nicht so.
Martin
Martin
-
Hallo,
hatte noch nicht das Vergnügen mit V5R4 zu arbeiten, aber füttert doch mal Google mit der entsprechenden CPFxxxx Nummer ...
Gruß,
Robert
-
Ich würde mal vermuten, das IBM neuerdings ein ENDSYS *CNTRLD macht. Ich verlasse mich nicht auf den SAV21 und mache das im CL.
ENDSYS OPTION(*IMMED)
DLYJOB DLY(600 )
SAVSYS DEV(CASXX)
ENDOPT(*LEAVE)
SAVLIB LIB(*NONSYS) DEV(CAS02) ENDOPT(*LEAVE)
SAV DEV('/qsys.lib/casxx.devd') OBJ(('/QSYS.LIB' +
*OMIT) ('/QDLS' *OMIT) ('/*' *INCLUDE))
SAVDLO DLO(*ALL) FLR(*ANY) DEV(CASXX) ENDOPT(*UNLOAD)
Das sichert immer alles ohne Probleme.
-
Fehlermeldung
Hallo,
die genaue Fehlermeldung wäre interessant. (CPI,CPA,CPF,..)
-
hier mein ganzes joblog
5722SS1 V5R4M0 060210 Job Log xxxxxxx 15/08/06 21:27:00 Page 1
Job name . . . . . . . . . . : DSP01 User . . . . . . : QSECOFR Number . . . . . . . . . . . : 010843
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
CPF1124 Information 00 15/08/06 19:36:49,256016 QWTPIIPP QSYS 066E *EXT *N
Message . . . . : Job 010843/QSECOFR/DSP01 started on 15/08/06 at 19:36:49
in subsystem QCTL in QSYS. Job entered system on 15/08/06 at 19:36:49.
*NONE Request 15/08/06 19:36:52,619152 QUICMD QSYS 0461 QUICMD QSYS 0461
Message . . . . : -go save
CPF1035 Escape 40 15/08/06 19:37:25,895656 QWCCSDUC QSYS 0536 QMNSRBND QSYS 02C5
Message . . . . : Subsystems ending with *IMMED option.
Cause . . . . . : The command is not allowed because all subsystems are
already ending immediately. Recovery . . . : Use the PWRDWNSYS command
with the *IMMED option.
CPA3712 Inquiry 99 15/08/06 20:07:04,592600 QMNSRBND QSYS 037A *EXT *N
Message . . . . : Not all subsystems ended. (C G)
Cause . . . . . : Subsystems have not ended in 30 minutes. It may take
longer than 30 minutes to end subsystems if your system is very busy. All
subsystems must be ended in order to run this save or restore operation.
Recovery . . . : Do one of the following: -- Type a C to cancel ending
subsystems. -- Type a G to continue ending subsystems. Possible choices for
replying to message . . . . . . . . . . . . . . . : C -- Cancel ending
subsystems G -- Continue ending subsystems
*NONE Reply 15/08/06 20:26:15,596464 QMHDSEXT QSYS 016E *EXT *N
Message . . . . : G
*NONE Request 15/08/06 20:46:01,464280 QMNSYSRQ QSYS 04A4 QMNSYSRQ QSYS 04A4
Message . . . . : - *SYSTEM/DSPJOB
CPA3712 Inquiry 99 15/08/06 20:57:14,823168 QMNSRBND QSYS 037A *EXT *N
Message . . . . : Not all subsystems ended. (C G)
Cause . . . . . : Subsystems have not ended in 30 minutes. It may take
longer than 30 minutes to end subsystems if your system is very busy. All
subsystems must be ended in order to run this save or restore operation.
Recovery . . . : Do one of the following: -- Type a C to cancel ending
subsystems. -- Type a G to continue ending subsystems. Possible choices for
replying to message . . . . . . . . . . . . . . . : C -- Cancel ending
subsystems G -- Continue ending subsystems
*NONE Reply 15/08/06 20:58:39,189088 QMHDSEXT QSYS 016E *EXT *N
Message . . . . : C
CPF1099 Escape 40 15/08/06 20:58:39,189504 QWCCSUUC QSYS 0499 QMNSRBND QSYS 03C3
Message . . . . : Subsystem not started because system ending.
CPF2361 Diagnostic 20 15/08/06 20:58:39,211840 QMNSRBND QSYS 040F QUIMNDRV QSYS 059F
Message . . . . : Error occurred with the option.
Cause . . . . . : An error occurred while you were trying to run one of the
following: -- Save entire system. -- Save system data only. -- Save all user
data. -- Create a distribution tape. -- Display log for messages. -- Restore
system and user data. -- Restore system data only. -- Restore all user data.
-- Power off the system. Recovery . . . : Press F10 (Display messages in
job log) or display the job log (DSPJOBLOG command). Correct the error and
try the request again.
*NONE Request 15/08/06 20:58:46,870856 QPTCHECK *N QUICMD QSYS 0461
Message . . . . : -PWRDWNSYS OPTION(*IMMED) RESTART(*YES)
CPC1207 Completion 50 15/08/06 20:59:58,617616 QWTMMTRS QSYS 0221 *EXT *N
From user . . . . . . . . . : QSYS
Message . . . . : Subsystem ending immediately.
CPC2191 Completion 00 15/08/06 20:59:58,629736 QLIDLOBJ QSYS 051B QLICLLIB QSYS 05DC
Message . . . . : Object QSROPT2X in QTEMP type *USRSPC deleted.
5722SS1 V5R4M0 060210 Job Log xxxxxxxx15/08/06 21:27:00 Page 2
Job name . . . . . . . . . . : DSP01 User . . . . . . : QSECOFR Number . . . . . . . . . . . : 010843
Job description . . . . . . : QDFTJOBD Library . . . . . : QGPL
MSGID TYPE SEV DATE TIME FROM PGM LIBRARY INST TO PGM LIBRARY INST
CPF1164 Completion 00 15/08/06 20:59:58,629952 QWTMCEOJ QSYS 00D7 *EXT *N
Message . . . . : Job 010843/QSECOFR/DSP01 ended on 15/08/06 at 20:59:58; 1
seconds used; end code 50 .
Cause . . . . . : Job 010843/QSECOFR/DSP01 completed on 15/08/06 at 20:59:58
after it used 1 seconds processing unit time. The job had ending code 50.
The job ended after 1 routing steps with a secondary ending code of 0. The
job ending codes and their meanings are as follows: 0 - The job completed
normally. 10 - The job completed normally during controlled ending or
controlled subsystem ending. 20 - The job exceeded end severity (ENDSEV job
attribute). 30 - The job ended abnormally. 40 - The job ended before
becoming active. 50 - The job ended while the job was active. 60 - The
subsystem ended abnormally while the job was active. 70 - The system ended
abnormally while the job was active. 80 - The job ended (ENDJOBABN command).
90 - The job was forced to end after the time limit ended (ENDJOBABN
command). Recovery . . . : For more information, see the Work Management
topic in the Information Center,
http://www.ibm.com/eserver/iseries/infocenter.
Martin
-
Zitat von pwrdwnsys
Ich würde mal vermuten, das IBM neuerdings ein ENDSYS *CNTRLD macht. Ich verlasse mich nicht auf den SAV21 und mache das im CL.
ENDSYS OPTION(*IMMED)
DLYJOB DLY(600 )
Das sichert immer alles ohne Probleme.
Nur solange, bist Du mit Deinem geschätzten DLY-Wert verkehrt liegst und das System mehr Zeit benötigt. Besser, die QSYSOPR-Nachrichten nach CPF0968 abfragen.
Gruß
Bodo
-
-
Hallo pwrdwnsys!
Zitat von pwrdwnsys
Ich würde mal vermuten, das IBM neuerdings ein ENDSYS *CNTRLD macht. Ich verlasse mich nicht auf den SAV21 und mache das im CL.
ENDSYS OPTION(*IMMED)
DLYJOB DLY(600 )
...
Das sichert immer alles ohne Probleme.
Ein ENDSYS kann nicht in allen Fällen das System beenden, näheres dazu steht in der Hilfe zu ENDSYS. Mach' lieber einen ENDSBS *ALL von der Konsole aus.
Viele Grüße
Jürgen
-
Hallo Wolfgang!
Hallo Martin!
Gebt den ENDSBS *ALL *IMMED aus dem SAVE21 doch einmal von Hand an der Konsole ein (Vorsicht: Das beendet das System!) und seht anschließend mit WRKACTJOB nach (mehrmals F5=Aktualisieren drücken), welche Jobs sich da nicht beenden lassen wollen.
Viele Grüße
Jürgen
-
Zitat von Bodo Roggenkamp
Nur solange, bist Du mit Deinem geschätzten DLY-Wert verkehrt liegst und das System mehr Zeit benötigt. Besser, die QSYSOPR-Nachrichten nach CPF0968 abfragen.
Gruß
Bodo
Mag sein. Ich betreue aber seit Jahren insgesamt 7 AS400 Systeme. Alle mit der gleichen Prozedur. Und da gab es nie ein Problem. Mag sein das dies mit V5R4 anders wird, aber das werde ich nächste Woche ja live erleben.
-
Moin *ALL,
ich haben zur Zeit eine 9406-550 V5R4 in der Vorbereitungsphase für eine Umstellung. Auch hier wurde bereits die Komplettsicherung geprobt, allerdings machen wir immer vor dem GO SAVE 21. ein ENDSBS SBS(*ALL) OPTION(*IMMED) und warten auf die Meldung EINGESCHRÄNKTER ZUSTAND. Funzt einwandfrei.
Similar Threads
-
By Stefan123 in forum IBM i Hauptforum
Antworten: 8
Letzter Beitrag: 02-02-07, 08:50
-
By Robi in forum IBM i Hauptforum
Antworten: 10
Letzter Beitrag: 04-11-06, 16:02
-
By GraueEminenz in forum NEWSboard Programmierung
Antworten: 1
Letzter Beitrag: 10-07-06, 11:58
-
By Hubert in forum IBM i Hauptforum
Antworten: 4
Letzter Beitrag: 10-05-06, 09:41
-
By NEich in forum IBM i Hauptforum
Antworten: 5
Letzter Beitrag: 10-05-06, 08:42
Berechtigungen
- Neue Themen erstellen: Nein
- Themen beantworten: Nein
- You may not post attachments
- You may not edit your posts
-
Foren-Regeln
|
Erweiterte Foren Suche
Google Foren Suche
Forum & Artikel Update eMail
AS/400 / IBM i
Server Expert Gruppen
Unternehmens IT
|
Kategorien online Artikel
- Big Data, Analytics, BI, MIS
- Cloud, Social Media, Devices
- DMS, Archivierung, Druck
- ERP + Add-ons, Business Software
- Hochverfügbarkeit
- Human Resources, Personal
- IBM Announcements
- IT-Karikaturen
- Leitartikel
- Load`n`go
- Messen, Veranstaltungen
- NEWSolutions Dossiers
- Programmierung
- Security
- Software Development + Change Mgmt.
- Solutions & Provider
- Speicher – Storage
- Strategische Berichte
- Systemmanagement
- Tools, Hot-Tips
Auf dem Laufenden bleiben
|
Bookmarks