Ok so hab ichs gemacht:
1) System iOperations Console geöffnet -> Verbindung hergestellt zur Fernen Konsole
2) IPL mit Ferner Steuerkonsole gemacht (Manuell -> Auswahl 03 Start IPL)
3) Bei der Anmeldung DST-Auswahl getroffen (1. IPL ...x-DSP Starten)
4) - Beim Anmeldescreen F5 gedrückt um das QSECOFR (SST) PW zu ändern
5) DST -> 4. Work with disk units -> 2. Work with disk unit recovery -> 10. Delete disk unit data
Code:
                          No Non-Configured Units                     
                                                                      
The function you requested cannot be performed at this time           
because:                                                              
                                                                      
  o  The requested function requires one or more non-configured       
     units.  No non-configured units were found on the system.        
                                                                      
This condition must be corrected before the requested function        
can be performed.                                                     
                                                                      
The following are the recommended recovery procedures:                
                                                                      
  o  If there are non-configured units connected to the system,       
     ensure that all such units are powered on and are cabled         
     correctly.  If all non-configured units are powered on and       
     are cabled correctly and this error still occurs, call for       
     service.                                                         
                                                                      



=>                      Display Disk Configuration Status                                                                                                    
         Serial                     Resource                      Hot Spare  
SP Unit  Number          Type Model Name       Status             Protection 
 1                                             Unprotected                   
      1  68-0F73F43      4328  070  DD004      RAID 5/Active           N     
      2  68-0F67706      4328  074  DD002      RAID 5/Active           N     
      3  68-0812767      4328  074  DD005      RAID 5/Active           N     
      4  68-0F4DE6C      4328  074  DD001      RAID 5/Active           N     
      5  68-0F31119      4328  074  DD003      RAID 5/Active           N
Und nu?? Leider kann man hier nix formatieren..
Quell: http://www.code400.com/forum/showthr...ear-an-Iseries