-
iSeries Access und Linux SuSE9.2?
Hallo zusammen,
habe gestern ein Update von Linux SuSE9.1 auf Suse9.2 durchgeführt. Danach wollte ich iSeries Access wieder einrichten.
Auf unserer AS400 haben wir noch einen älteren Release Stand 4.X. Bisher habe ich iSeries Access v1.3 benutzt und nach Änderung der X11 Konfig (unscalable fonts) ging auch alles tadellos.
Unter SuSE 9.2 habe ich zuerst diese Version 1.3 aufgespielt und nachdem sie nicht gestartet hat auch wieder die X11 Anpassungen gemacht. Mit dem Resultat, dass es immer noch nicht geht. Danach habe ich bei IBM die aktuellste Version 1.6 heruntergeladen und installiert. Die Konfiguration geht, aber beim Verbindungsaufbau schließt das Fenter ohne irgendeine Fehlermeldung. Auch im Log werden keine Einträge geschrieben?!
Kann mir jemand weiter helfen?
Grüßle Patrick
-
Client Access
Hallo Patrick,
vielleicht hilft Dir diese Seite weiter:
http://www-1.ibm.com/servers/eserver.../access/linux/
-
iSeries Access
Suse verwendet jetzt ein anderes X, das wohl bei den Fonts
Probleme hat. Starte mal irgendeine Java-Anwendung , z.B.
tn5250j, und danach iSeriessAccess.
Gruss
WL
-
Hallöchen,
da habe ich mich gesatern schon durchgeforstet. Leider ohne Erfolg.
Dennoch thanx und einen erfolgreichen Tag.
Grüßle Patrick
----
Zitat von TARASIK
-
Schreib mal wenn ok
Hi Travelmann,
ich hab z.zt. auch noch Suse 9.1.
Wenn du dein Prob. gelöst hast, bitte mal info wie !!
Danke
Robi
-
:-(
Hallo Robi,
:-( leider bisher kein Erfolg gehabt. Auch wenn zuerst eine Javaanwendung gestartet wurde will das iSeries Fenster nicht auf gehen.
Werde ebenfalls noch forschen müssen.
Gebe dir Bescheid, wenn es etwas neues gibt.
Grüßle Patrick
Zitat von Robi
Hi Travelmann,
ich hab z.zt. auch noch Suse 9.1.
Wenn du dein Prob. gelöst hast, bitte mal info wie !!
Danke
Robi
-
ES KLAPPT!!!
Hallo,
1000 Dank - deine Info hat zum gewünschten Ergebnis geführt.
Jetzt wäre es noch super, wenn auch IBM das Problem aufgreifenb würde und im nächsten Update berücksichtigt.
Grüßle Patrick
Zitat von lieser
Suse verwendet jetzt ein anderes X, das wohl bei den Fonts
Probleme hat. Starte mal irgendeine Java-Anwendung , z.B.
tn5250j, und danach iSeriessAccess.
Gruss
WL
-
Hallo Patrick, hallo Forum
die Antwort kommt vielleicht etwas spät, aber da google diese Seite immernoch als eine der ersten Treffer listet hier nochmal der Link zur Lösung:
Bitte beachten, dass wenn in der '/etc/X11/XF86config'
"PLEASE DO NOT EDIT THIS FILE"
steht das durchaus seinen Sinn hat! ;-)
Was der Patch für Nebenwirkungen auf yast oder sax2 hat kann ich leider nicht sagen.
Getestet habe ich es auf einem SUSE Linux 9.2 mit
xorg-x11 6.8.1-15.1
xorg-x11-fonts-75dpi 6.8.1-15.5
Hier der Text von der IBM Webseite (den Link findet ihr am Ende):
[...]
Error Messages
Emulator will not start, font error indicated.
The emulator uses scalable 75 and 100 DPI fonts. If scalable fonts are not found an attempt to use a fixed font is made. Even if a fixed font is found and used, for proper full screen and size support, the X server should be configured to use scalable fonts.
The error returned should look similar too:
"*****Check your /etc/X11/XF86Config file*****
-b&h-lucidatypewriter-medium-r-normal-sans-0-* scalable fonts are not available.
*****Using fixed fonts******.
Or
Check your /etc/X11/XF86Config file.
-b&h-lucidatypewriter-medium-r-normal-sans-* fixed and scalable fonts are not available. Session not starting.
For either of the above messages, 75 and 100 dpi fonts need to be made available. The default font server is configured usually in one of the following two ways:
1. The "XFree86Config" File
The global XFree86 config file "XF86Config" or "XF86Config-4" is located in the /etc or /etc/X11 directories. The user may also have ".XF86Config" or ".XF86Config-4" (user config version) in his home directory.
If the following is in the XF86Config, the font server is configured here and is not configured to use 75 and 100 dpi scaled fonts.
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
To enable 75 and 100 dpi scalable fonts, change the above two lines to look like this:
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
2. Font server (xfs) "config" file
If the XF86Config file contains a single line similar to the following, then look for the file "config" in /etc/X11/fs directory:
FontPath "unix/:7100"
Similar to the steps above find the lines and remove the ":unscaled" from the lines for 75 and 100 dpi fonts.
For example change:
catalogue = /usr/X11R6/lib/X11/fonts/korean,
/usr/X11R6/lib/X11/fonts/misc:unscaled,
/usr/X11R6/lib/X11/fonts/75dpi:unscaled,
/usr/X11R6/lib/X11/fonts/100dpi:unscaled,
to look like this:
catalogue = /usr/X11R6/lib/X11/fonts/korean,
/usr/X11R6/lib/X11/fonts/misc:unscaled,
/usr/X11R6/lib/X11/fonts/75dpi,
/usr/X11R6/lib/X11/fonts/100dpi,
Then restart the X server.
[...]
Quelle:
http://www-1.ibm.com/servers/eserver...ide/#5250_faqs
Similar Threads
-
By linguin in forum NEWSboard Linux
Antworten: 0
Letzter Beitrag: 03-01-07, 08:22
-
By Peterd in forum NEWSboard Windows
Antworten: 3
Letzter Beitrag: 21-12-06, 13:49
-
By Grandmasta in forum NEWSboard Linux
Antworten: 4
Letzter Beitrag: 03-11-06, 07:47
-
By njaclogoo in forum NEWSboard Server Software
Antworten: 4
Letzter Beitrag: 18-08-06, 10:17
-
By Unwissender in forum NEWSboard Windows
Antworten: 9
Letzter Beitrag: 03-07-06, 15:01
Berechtigungen
- Neue Themen erstellen: Nein
- Themen beantworten: Nein
- You may not post attachments
- You may not edit your posts
-
Foren-Regeln
|
Erweiterte Foren Suche
Google Foren Suche
Forum & Artikel Update eMail
AS/400 / IBM i
Server Expert Gruppen
Unternehmens IT
|
Kategorien online Artikel
- Big Data, Analytics, BI, MIS
- Cloud, Social Media, Devices
- DMS, Archivierung, Druck
- ERP + Add-ons, Business Software
- Hochverfügbarkeit
- Human Resources, Personal
- IBM Announcements
- IT-Karikaturen
- Leitartikel
- Load`n`go
- Messen, Veranstaltungen
- NEWSolutions Dossiers
- Programmierung
- Security
- Software Development + Change Mgmt.
- Solutions & Provider
- Speicher – Storage
- Strategische Berichte
- Systemmanagement
- Tools, Hot-Tips
Auf dem Laufenden bleiben
|
Bookmarks